Packer’s Workload Assessment, Using the OWAS Method

Andrzej Marek Lasota

Abstract


One of the elements of the logistics system is the subsystem of production, which is a combination of physical elements such as machinery and equipment, tools, and (most importantly) people. Furthermore, systems dependent on the human-operator are particularly susceptible to problems from discomfort, leading to reduced production quality and an increase in the cost of training and absence from work. The aim of this study was to assess the workload and risk of musculoskeletal discomfort (MSDs) in the position of a logistics-packer, through an analysis of risk factors. A computerized version of the OWAS (Ovako Working Posture Analysis System) method was used to conduct the evaluation, in which 10 steps of the product packaging process were assessed. As a result of the assessment for the category of action categories (AC), six steps qualified as AC 1, 2 steps as AC 2, and 2 steps as AC 3. The main factors affecting the risk of a negative assessment of posture were keeping the back bent and twisted and keeping the legs bent at the knees. Work on the assessed position for two activities is associated with a significant risk of MSDs, therefore corrective actions should be carried out as soon as possible. Ergonomic intervention should be linked to: revision of the position and methods of work. After making changes to the assessed position, re-evaluation with the OWAS method is recommended to verify the effectiveness of the changes.

Keywords


OWAS ; workload ; ergonomics ; risk ; MSDs

Full Text:

PDF

References


Battini, D., Faccio, M., Persona, A., Sgarbossa, F.: New methodological framework to improve productivity and ergonomics in assembly system design. International Journal of Industrial Ergonomics 41(1)/2011, pp.30–42.

Black, J.T.: Design rules for implementing the Toyota Production System. International Journal of Production Research 45(16)/2007, pp.3639-3664.

Calvo, A.: Musculoskeletal disorders (MSD) risks in forestry: a case study to propose an analysis method. Agricultural Engineering International 11/2009, pp.1682-1130.

Carrasco, C., Coleman, N., Healey, S.: Packing products for customers: an ergonomics evaluation of three supermarket checkouts. Applied Ergonomics 26/1995, pp.101-8.

Cimino, A., Longo, F., Mirabelli, G.: A multimeasure-based methodology for the ergonomic effective design of manufacturing system Workstation. International Journal of Industrial Ergonomics 39(2)/2009, pp.447-455.

Engels, J.A., Landeweerd, J.A., Kant, Y.: An OWAS-based analysis of nurses’ working postures. Ergonomics 37/1994, pp.909-19.

Gangopadhyay, S., Das, T., Ghoshal, G., Ghosh, T.: Work organization in sand core manufacturing for health and productivity. International Journal of Industrial Ergonomics 36(10)/2006, pp. 915-920.

Genaidy, A.M., Al-Shed, A.A., Karwowski, W.: Postural stress analysis in industry. Applied Ergonomics 25/1994, pp.77-87.

Gonzalez, B.A., Adenso-Diaz, B., Torre, P.G.: Ergonomic performance and quality relationship: an empirical evidence case. International Journal of Industrial Ergonomics 31/2003, pp.33-40.

Grzybowska, K.: An OWAS-based analysis of storekeeper workloads. Logistics and Transport, 10(1)/2010, pp. 57-63

Hallbeck, M.S., Bosch, T., Van Rhijn, G. (J. W.), Krause F., de Looze, M.P. Vink, P.: A tool for early workstation design for small and medium enterprises evaluated in five cases. Human Factors and Ergonomics in Manufacturing & Service Industries 20(4)/2010, pp.300-315.

Hirose, M., Deffaux, G., Nakagaki, Y.: A Study on data input of natural human motion for virtual reality system, http://vrsj.ime.cmc.osaka-u.ac.jp/ic-at/papers/95245.pdf, 2013.01.05.

Hignett, S., McAtamney, L.: Rapid Entire Body Assessment (REBA). Applied Ergonomics 31/2000, pp.201-5.

Hignett, S.: Postural analysis of nursing work. Applied Ergonomics 27/1996, pp.171-6.

Istota inżynierii produkcji. Komitet Inżynierii Produkcji Polska Akademia Nauk, Warszawa 2012, http://www.kip.pan.pl/images/stories/zdjecia/wydawnictwa/ekspertyza.pdf, 2013.01.11.

Joode, B.W., Burdorf, A., Verspuy, C.: Physical load in ship maintenance: hazard evaluation by means of a workplace survey. Applied Ergonomics 28/1997, pp.213-9.

Karhu, O., Kansi, P., Kuorinka, I.: Correcting working postures in industry: a practical method for analysis. Applied Ergonomics 8/1977, pp.199–201.

Kasvi, J.J.J., Vartiainen, M., Pulkkis, A., Nieminen, M.: The role of information support systems in the joint optimization of work systems. Human Factors and Ergonomics in Manufacturing 10(2)/2000, pp.193-221

Kee, D., Karwowski, W.: A Comparison of three observational techniques for assessing postural loads in industry. International Journal of Occupational Safety and Ergonomics (JOSE) 13(1)/2007, 3–14.

Kilbom, A.: Assessment of physical exposure in relation to work-related musculoskeletal disorders – what information can be obtained from systematic observations? Scandinavian Journal of Work, Environment & Health 20/1994, pp. 30-45, Special issue.

Kivi, P., Mattila, M.: Analysis and improvement of work postures in the building industry: application of the computerized OWAS method. Applied Ergonomics 22/1991, pp.43–8.

Kumar, S.: A conceptual model of overexertion, safety, and risk of injury in occupational settings. Human Factors 36(2)/1994, pp.197-209.

Lamkull, D., Hanson, L., Ortengren, R.: A comparative study of digital human modelling simulation results and their outcomes in reality: A case study within manual assembly of automobiles. International Journal of Industrial Ergonomics 39/2009, pp.428-441.

LI, K.W., Lee, Ch-L.: Postural analysis of four jobs on two building construction sites: an experience of using the OWAS method in Taiwan. Journal of Occupational Health 41/1999, pp.183-190.

Massaccesi, M., Pagnotta, A., Soccetti ,A., Masali, M., Masiero, C., Greco, F.: Investigation of work-related disorders in trunk drivers. Applied Ergonomics 34/2003, pp.303-7.

McAtamney, L., Corlett, E.N.: RULA: a survey method for the investigation of work-related upper limb disorders. Applied Ergonomics 24/1993, pp.91-9.

Minami, H., Nishimura, T., Seo, A., Doi, H.: Development of a new method for ergonomic usability and workload evaluation for digital human, Asia Paciffic Industrial Engineering & Management Systems Conference 2009, pp.1878-1883, 2009, http://www.knu.edu.tw/lecture/%E6%AD%B7%E5%B9%B4%E6%95%99%E5%AD%B8%E8%B3%87%E6%96%99/2009-981%E5%95%8F%E9%A1%8C%E8%A7%A3%E6%B1%BA%E4%B9%8B%E7%A0%94%E7%A9%B6%E6%96%B9%E6%B3%95/2009.12.23%E7%A0%94%E7%A9%B6%E6%96%B9%E6%B3%95%E4%B8%8A%E8%AA%B2%E5%85%A7%E5%AE%B9/APIMES2009/Papers/345.pdf, 2013.02.06.

Muthukumar, K., Sankaranarayanasamy, K., Ganguli, A.K.: Analysis of frequency, intensity, and interference of discomfort in computerized numeric control machine operations. Human Factors and Ergonomics in Manufacturing & Service Industries 00 (0)/2012, pp.1-8.

Quansah, R.: Harmful postures and musculoskeletal symptoms among fish trimmers of a fish processing factory in Ghana: a preliminary investigation. International journal of occupational safety and ergonomics (JOSE) 11(2)/2005, pp.181-90.

Ryan, G.A.: The prevalence of musculoskeletal symptoms in supermarket workers. Ergonomics 32/1989, pp.359–71.

Scott, G.B., Lambe, N.R.: Working practices in a perchery system, using the OVAKO Working Posture Analysing System (OWAS). Applied Ergonomics 27/1996, pp.281-4.

Sesek, R., Gilkey, D., Rosecrance, J., Guzy, A.: The utility of OWAS in auto manufacturing assembly job evaluations, 2nd Annual Regional National Occupational Research Agenda (NORA) Young/New Investigators Symposium, Salt Lake City, April 16, 2004.

Słowiński, Bronisław.: Wprowadzenie do logistyki. Wydawnictwo uczelniane Politechniki Koszalińskiej. Koszalin 2008.

Tytyk, E.: Projektowanie ergonomiczne, PWN, Warszawa-Poznań 2001.

Vieira, E.R., Kumar, S.: Working postures: a literature review. Journal of Occupational Rehabilitation 14(2)/2004, pp.143-59.

Wang, H., Hwang, J., Lee, K-S., Kwag, J-S., Jang, J-S., Jung, M-C.: Upper body and finger posture evaluations at an electric iron assembly plant. Human Factors and Ergonomics in Manufacturing & Service Industries 00 (0)/2012, pp.1-11.

Westgaard, R.H., Winkel, J.: Ergonomic intervention research for improved musculoskeletal health: A critical review. International Journal of Industrial Ergonomics 20/1997, pp.463-500.

Wright, E.J., Haslam, R.A.: Manual handling risks and controls in a soft drinks distribution centre. Applied Ergonomics 30/1999, pp.311-8.


Refbacks